Anyone know the proper way to bend the bolt on a bolt action rifle so it will not hit a scope? - scope heated towel rail
When heated with a torch, I have to remove it .. or it can bend without heateing.
Monday, January 4, 2010
Scope Heated Towel Rail Anyone Know The Proper Way To Bend The Bolt On A Bolt Action Rifle So It Will Not Hit A Scope?
4 comments:
It is not difficult, but you have to do it right the first time. If you trust that you place, then someone who does. Here are the steps:
1. Remove lock, crack control in the handle. If there are cracks in the fact that if you want to TIG.
2. Remove the screw Indigo.
3. Lock the bolt in a vise and cover the main body with a heat insulating layer (sheet metal, sheets of fire, etc.)
4. With a small torch, heat the bolt, where you start the curve on a bright red. During his brilliant use of a file or a metallic object in the direction of travel of the pin wants to push me there. Repeat the corners where others are required.
5. With sandpaper grain of light, clean the areas marked slope screw. Remember that everything you will miss your message after the indigo has been repaired.
6. Refinsh its screw and ready. You can use the blue car to finish the piece, or take to facilitate a transaction and its transition. If you have a high dollar weapons immersion, if not work, then the washcloth in the Blu well.
7. EnjoyYour gun.
Here is a link to do, such as the Mauser. This can help you. Take your time and do it!
http://www.brownells.com/aspx/NS/General ...
Good Luck & Happy Shooting!
It is not difficult, but you have to do it right the first time. If you trust that you place, then someone who does. Here are the steps:
1. Remove lock, crack control in the handle. If there are cracks in the fact that if you want to TIG.
2. Remove the screw Indigo.
3. Lock the bolt in a vise and cover the main body with a heat insulating layer (sheet metal, sheets of fire, etc.)
4. With a small torch, heat the bolt, where you start the curve on a bright red. During his brilliant use of a file or a metallic object in the direction of travel of the pin wants to push me there. Repeat the corners where others are required.
5. With sandpaper grain of light, clean the areas marked slope screw. Remember that everything you will miss your message after the indigo has been repaired.
6. Refinsh its screw and ready. You can use the blue car to finish the piece, or take to facilitate a transaction and its transition. If you have a high dollar weapons immersion, if not work, then the washcloth in the Blu well.
7. EnjoyYour gun.
Here is a link to do, such as the Mauser. This can help you. Take your time and do it!
http://www.brownells.com/aspx/NS/General ...
Good Luck & Happy Shooting!
Take it to a dealer.
Take Smith
Post a Comment